ITI Exam

आईटीआई परीक्षा की बेहतर तैयारी

Machinist 1st Year Module

Safety and Hand tools | सुरक्षा और हाथ के औजार

START QUIZ पर क्लिक करें और अपना Test पूरा करें

Q1. What will happen if run a grinder without truing?
Q2. What is the name of the accessory?
Q3. What is the name of the hacksaw blade element marked X?
Q4. What will happen if the datum surface is not perfectly flat?
Q5. What is the purpose of ‘V’ groove provided on the base of universal surface gauge?
Q6. What is the name of the part marked X?
Q7. What is the name of part marked as X?
Q8. How to make use of metal chips?
Q9. How the calipers are classified?
Q10. Which fire extinguishers is used for flammable liquid fires?
Q11. What is the name of the marking tool?
Q12. What is the colour code of bin for paper waste?
Q13. What is the material used made of surface plate?
Q14. What A stands for in ABC of first aid?
Q15. Which file is used for filing narrow grooves and angle more than 10°?
Q16. What is purpose V-block?
Q17. What is the name of part marked as X?
Q18. Which is used to protect eyes while grinding?
Q19. What is the name of the part marked X ?
Q20. Which one of the marking media will take more time to dry?
Q21. What is the name of the chisel used to chip - off excess metal of welded joints and castings?
Q22. What is the purpose of a work rest of the pedestal grinder?
Q23. What is the angle of centre punch?
Q24. What is the purpose of a bastard file?
Q25. What is the angle between two machined surface on angle plate?
Q26. What is the use of a 30° prick punch?
Q27. What is the feature checked by Try square?
Q28. What is the type of the steel rule?
Q29. What is the name of the part marked X?
Q30. How to you protect already finished work surface from damage while using in the vice?
Q31. What is the name of the accessory?
Q32. What is the name of the vice?
Q33. What is the name of the Instrument?
Q34. What is the grade of file used for rapid and larger quantity of metal removal?
Q35. What is the shape of the needle file?
Q36. Which term indicates the neatness and cleanliness of workplace in 5s concept?
Q37. What is the name of the part marked X?
Q38. What will happen if the rake angle of a chisel increases?
Q39. What will happen if clearance angle of a chisel increases?
Q40. What material is used for making scriber?
Q41. Which type of chisel is used for squaring materials oft the corners and joints?
Q42. What is the name of the part marked as ʹXʹ?
Q43. What is the first aid for the third degree burns?
Q44. Which comes under the machine safety?
Q45. Name the cut of file shown in figure.
Q46. What is the name of the equipment?
Q47. What is the name of accessory?
Q48. What could be the remedy if the cutting deviated from the line of marking?
Q49. What is the name of grinder?
Q50, What is the name of the part of the file marked X?
Machinist 1st Year Module 1 Safety and Hand tools
You got {{userScore}} out of {{maxScore}} correct
{{title}}
{{image}}
{{content}}
Youtube Click here
Telegram Group Join Now
Whatsapp Group Join Now
Facebook Group Join Now
Instagram Follow
Application Download Now

Leave a Reply

Your email address will not be published. Required fields are marked *