Milling Machine and Operations | मिलिंग मशीन और संचालन
START QUIZ पर क्लिक करें और अपना Test पूरा करें
Q1. Which milling attachment is used to drive small cutters at high speeds?
Q2. What type of cutter having teeth at the end as well as on periphery?
Q3. Why universal spiral attachment is having two swiveling actions to set any compound angle?
Q4. What is the name of the milling attachment?
Q5. Which type of milling machine is ideally suitable for boring, pocket milling, profile milling and for keyways in the middle of the shaft?
Q6. Which machine is removing material at faster rate in comparison with other machines?
Q7. What is the maximum swiveling angle of table in universal milling machine?
Q8. Which type of milling machines can accommodate heavy works?
Q9. What is the cause if finished milling surface is poor and cutter may wear out quickly?
Q10. What is the name of part marked as X?
Q11. Which milling attachment is fitted to the vertical or horizontal milling machine as required?
Q12. What type of attachment is used to mill spirals with a plain milling machine?
Q13. What is the name of part marked as X?
Q14. Which type of milling cutters are used for cutting soft steel and brass?
Q15. What is the name of milling operation?
Q16. What is the name of the cutter?
Q17. What type of milling cutter having teeth on periphery and the cutting edged are placed on a conical surface?
Q18. What is the name of the milling?
Q19. What is the type of milling machine?
Q20. Which type of side and face cutter has the teeth on one side only?
Q21. What is the type of milling cutter?
Q22. Which types of side milling cutters are used for heavy straddle milling and for machining one side only?
Q23. What is the name of the milling attachment?
Q24. Which type of side milling cutter having alternate teeth with opposite helix angle?
Q25. What is name of the milling cutter?
Q26. What is the name of part marked as X?
Q27. What is the name of the milling process?
Q28. Which milling attachment is used for profile milling, surfacing of quantity of small pieces in one step up?
Q29. Which milling process the cutting is done on the end of the cutter as well as periphery?
Q30. What is the name of the milling attachment?
Q31. What is the name of the milling process?
Q32. Which part of the milling machine the feed motor and gear box are accommodated?
Q33. What is the name of part marked as X?
Q34. Which type of side milling cutters are used for milling wider slots of accurate width?
Q35. What is the name of milling cutter?
Q36. Which milling attachment the cross feed is used to move the cutter into the work piece and the longitudinal feed is to index the cutter?
Q37. What is the helical angle of light duty plain milling cutters?
Q38. Which milling machine process, the production of horizontal flat surface is parallel to the axis of the milling machine?
Q39. Which type of milling cutters the sides are relieved or dished to prevent the sides of the cutter from rubbing or binding?
Q40. Which type of cutter is used for milling the flute on taps or reamers?
Q41, What is the name of milling cutter?
Q42. What is the part marked as ʹXʹ?
Q43. Which type of side milling cutters having teeth on both sides?
Q44. What type of attachment is used to provide reciprocating drive for a single point cutting tool?
Q45. Which type of attachment is used for cutting helical threads, gears?
Q46. Which machine tool can hold more number of cutters at a time and also good in accuracy & surface finish?
Q47. What is the reason for the breaking of cutter while rough milling?
Q48. What type of side milling cutters are used for milling deep and narrow slots and key ways?
Q49. What is the name of part marked as X?
Q50. What is the name of the milling process?
Machinist 1st Year Module 7 Milling Machine and Operations
You got {{userScore}} out of {{maxScore}} correct
{{title}}
{{image}}
{{content}}