Allowance Master Notes: Positive, Negative Allowance, Difference from Tolerance
ITI Fitter Allowance Master Notes in Hindi:
Positive, Negative Allowance, Difference from Tolerance & Workshop Guide
(अलॉउंस: पॉजिटिव/नेगेटिव अलॉउंस, टॉलरेंस से अंतर और कार्यशाला मार्गदर्शिका)
इंजीनियरिंग मेट्रोलॉजी और मशीन असेंबली के अंतर्गत दो जुड़ने वाले पुर्जों (Mating Parts, जैसे होल और शाफ्ट) के बीच उनकी अधिकतम सामग्री सीमाओं (Maximum Material Limits) पर जानबूझकर रखे गए अंतर (Intentional Difference) को Allowance (अलॉउंस) कहा जाता है। ITI Fitter 1st & 2nd Year Theory पाठ्यक्रम के अंतर्गत लिमिट्स और फिट्स का यह एक अत्यंत महत्वपूर्ण वैचारिक चैप्टर है।
इस विस्तृत मास्टर चैप्टर में हम अलॉउंस की परिभाषा, इसके प्रकार—पॉजिटिव अलॉउंस (क्लियरेंस फिट के लिए) और नेगेटिव अलॉउंस (इंटरफेरेंस फिट के लिए)—तथा अलॉउंस और टॉलरेंस के बीच के मुख्य अंतर का विस्तार से अध्ययन करेंगे।
1. Introduction and Core Purpose (परिचय और मुख्य उद्देश्य)
किसी मशीन में जब दो पुर्जों को आपस में फिट करना होता है, तो डिजाइनर उनकी कार्यप्रणाली के अनुसार उनके आकारों में एक निश्चित अंतर निर्धारित करता है ताकि वे सुचारू रूप से कार्य कर सकें। इसी पूर्व-निर्धारित अंतर को अलॉउंस कहा जाता है। इसका मुख्य उद्देश्य फिटर छात्र में असेंबली डिज़ाइन की स्पष्ट समझ, पॉजिटिव व नेगेटिव अलॉउंस की गणना, और कार्यशाला में सही फिट चुनने की दक्षता विकसित करना है।
Core Allowance Principles
Negative Allowance (ऋणात्मक अलॉउंस): Shaft size is greater than hole size $\rightarrow$ Results in Interference Fit.
Motto: “Allowance is the designed clearance or interference between mating parts to achieve a specific mechanical fit.”
2. Major Types of Allowance (अलॉउंस के प्रमुख प्रकार)
1. Positive Allowance (पॉजिटिव अलॉउंस)
इसमें होल का न्यूनतम आकार शाफ्ट के अधिकतम आकार से अधिक होता है, जिससे हमेशा क्लियरेंस (Gap) मिलती है।
2. Negative Allowance (नेगेटिव अलॉउंस)
इसमें शाफ्ट का आकार होल से बड़ा होता है (इसे इंटरफेरेंस या ओवरलैप भी कहते हैं), जिससे टाइट जकड़न मिलती है।
3. Detailed Comparison: Allowance vs Tolerance (अलॉउंस और टॉलरेंस में अंतर तालिका)
| Feature / Parameter (विशेषता / पैरामीटर) | Allowance (अलॉउंस) | Tolerance (टॉलरेंस) |
|---|---|---|
| Definition | The intentional difference between the dimensions of mating parts. | The permissible variation in the size of a single component. |
| Application | It exists between two different mating components (Hole and Shaft). | It applies to an individual single dimension (High limit – Low limit). |
| Sign Nature | Can be positive (clearance) or negative (interference). | Always positive (it represents a range of permissible variation). |
| Primary Purpose | To determine the type of fit (Clearance, Interference, or Transition). | To accommodate manufacturing errors and control machining precision. |
दो जुड़ने वाले पुर्जों (Mating Parts) के बीच जानबूझकर रखे गए अंतर को क्या कहा जाता है?
Answer: अलॉउंस (Allowance)
4. Step-by-Step Practical Calculation Procedure
| Step (चरण) | Procedure Details (प्रक्रिया विवरण) |
|---|---|
| 1. Identify Mating Dimensions | होल की लो लिमिट (Low Limit of Hole) और शाफ्ट की हाई लिमिट (High Limit of Shaft) के मान नोट करें। |
| 2. Calculate Clearance / Allowance | $\text{Allowance} = \text{Min. Hole Size} – \text{Max. Shaft Size}$ का सूत्र लागू करें। |
| 3. Check Sign of Result | यदि परिणाम धनात्मक (+) है, तो पॉजिटिव अलॉउंस (Clearance Fit) है; यदि ऋणात्मक (-) है, तो नेगेटिव अलॉउंस (Interference Fit) है। |
| 4. Verify with Assembly Requirements | सुनिश्चित करें कि परिणामी अलॉउंस मशीन की कार्य आवश्यकता (गति या जकड़न) के अनुरूप है। |
5. Essential Rules for Understanding Allowance
- Not a Tolerance: छात्रों को यह स्पष्ट होना चाहिए कि टॉलरेंस एक ही पुर्जे की छूट है, जबकि अलॉउंस दो अलग-अलग फिट होने वाले पुर्जों के बीच का अंतर है।
- Role in Fit Selection: पॉजिटिव अलॉउंस हमेशा क्लियरेंस फिट पैदा करता है, जबकि नेगेटिव अलॉउंस (यानी ओवरलैप) हमेशा इंटरफेरेंस फिट पैदा کرتا है।
- Precision Designing: डिजाइनरों को मशीनिंग एरर और थर्मल एक्सपेंशन को ध्यान में रखते हुए ही अलॉउंस का मान निर्धारित करना चाहिए।
6. ITI Exam ke liye Important Points (परीक्षा के लिए मुख्य बिंदु)
- Core Definition: Allowance is the designed allowance or clearance between mating parts to achieve a desired fit.
- Difference from Tolerance: Tolerance is the allowable variation in a single part, whereas allowance is the difference between mating parts.
- Positive Allowance Function: Allows relative motion between parts, such as shafts rotating in journal bearings.
- Negative Allowance Function: Provides rigid, permanent, or semi-permanent locking without relative motion, such as force fits.
- Standardization: ISO and BIS standards provide pre-calculated tables of allowances and fits for common engineering applications.
7. Conclusion (निष्कर्ष)
Allowance फिटर ट्रेड की मेट्रोलॉजी और असेंबली डिजाइन का एक अत्यंत महत्वपूर्ण सैद्धांतिक चैप्टर है। ITI Fitter के छात्रों को अलॉउंस की परिभाषा, टॉलरेंस से इसका अंतर, तथा इसके पॉजिटिव और नेगेटिव रूपों का पूर्ण व्यावहारिक ज्ञान होना चाहिए।